ABS fault in electrical circuit

My ABS light has come on and went out about 3 times now. The first time it happened I pulled the wheel and rotor on the offending speed sensor ( right front) and found a bit of rust accumulated on the tip of the sensor. Cleaned the rust and cleared the intermittent electrical circuit fault right front abs sensor trouble code. It has stayed away for a little while. It happened 2 more times now, but went out by itself. Today I put a meter on the sensor to check resistance. The left sensor that is not throwing a fault read 1034 ohms. The right sensor ( suspect) reads 1142 ohms. Can anyone confirm if The resistance on the right sensor is too high. I checked the wiring harness pretty thoroughly. It does not appear to be corroded or damaged in any way

ABS fault in electrical circuit