Hi Guys,
sorry i dont know if this is the correct section but anyway i will post it:
maybe some can help me with an issue i currently have in my car.
I had a renault clio mk2 from 2003. it was a 1.5 dci 80bhp but i swapped to an 1.9 dTI 80bhp.
The injection is the same used on VW 1.9 tdi engines with VP37 injection pump.
Since i swapped the engine i had this problem that in 1500 to 2250 rev range the car is choking.
So if step on the throttle and get some progressive acceleration that car doesn't choke but as soon as the throttle gets stabilised and the rev range between 1.5 and 2.25 the car always chokes, from 1st to 5th gear.
Already got a new set of injectors running with the same results, then got the race520 nozzles and i started to feel more the choking.
Ran an injector cleaner and some ATF with the fuel to clean/lubricate the all circuit but the problem is the same.
I did two diagnosis one with the renault can clip software and with a universal machine.
With the universal machine it detected an error: "advance timing solenoide".
Any idea what could this mean?
You can see the behavior here:
https://www.youtube.com/watch?v=VvRxe_DVajw
sorry i dont know if this is the correct section but anyway i will post it:
maybe some can help me with an issue i currently have in my car.
I had a renault clio mk2 from 2003. it was a 1.5 dci 80bhp but i swapped to an 1.9 dTI 80bhp.
The injection is the same used on VW 1.9 tdi engines with VP37 injection pump.
Since i swapped the engine i had this problem that in 1500 to 2250 rev range the car is choking.
So if step on the throttle and get some progressive acceleration that car doesn't choke but as soon as the throttle gets stabilised and the rev range between 1.5 and 2.25 the car always chokes, from 1st to 5th gear.
Already got a new set of injectors running with the same results, then got the race520 nozzles and i started to feel more the choking.
Ran an injector cleaner and some ATF with the fuel to clean/lubricate the all circuit but the problem is the same.
I did two diagnosis one with the renault can clip software and with a universal machine.
With the universal machine it detected an error: "advance timing solenoide".
Any idea what could this mean?
You can see the behavior here:
https://www.youtube.com/watch?v=VvRxe_DVajw
Renault Clio 1.9 DTI
0 commentaires:
Enregistrer un commentaire