Hey guys I'm selling an 03 project truck. I'm working on the road now and have no time for my toys so I'm cutting my losses. I'm out of town right now and just have a few pics of it. I will get more when I'm back home.
Cr threw a rod so and rebuilt 12v was put in.
All cummins bearings and head gasket. All other gaskets were interstate mcb
Mahle replacement pistons
Block is a 98 storm block 215 pump. Crazy carls app kit for throttle linkage.
5x12 injectors
Arp 425 studs
Head is ported and polished and o ringed
Colt 181/210 cam
3 piece manifold and a htt 62/65 13 ss
The truck has all options except sunroof. It has 180k on the body. It has a few bubbles starting on the bed I'll get some pictures of that also when I get back. Truck has b and w turnover ball and brake controller.
So here's what it needs:
It still has ECM and untouched harness. I adapted all sensors over but I cannot get a tach signal from it. Oil pressure works on the dash when it's running.
Needs exhaust and intake built for it.
Also some little crap the return for power steering plumbed and lower radiator hose. Truck also has flex a lite fans on it.
It needs a fuel shutoff wired or pull cable put on.
I'm asking 15 for it. Which I think is fair it does not need that much work to be drivable. Would also take some off if I could keep the turbo. Had intentions of building a small set of twins.
My number is 319 four 70 six six 20 call or text. Please leave a message and I will get back with when I'm not at work.
[IMG]
[/IMG]
[
Cr threw a rod so and rebuilt 12v was put in.
All cummins bearings and head gasket. All other gaskets were interstate mcb
Mahle replacement pistons
Block is a 98 storm block 215 pump. Crazy carls app kit for throttle linkage.
5x12 injectors
Arp 425 studs
Head is ported and polished and o ringed
Colt 181/210 cam
3 piece manifold and a htt 62/65 13 ss
The truck has all options except sunroof. It has 180k on the body. It has a few bubbles starting on the bed I'll get some pictures of that also when I get back. Truck has b and w turnover ball and brake controller.
So here's what it needs:
It still has ECM and untouched harness. I adapted all sensors over but I cannot get a tach signal from it. Oil pressure works on the dash when it's running.
Needs exhaust and intake built for it.
Also some little crap the return for power steering plumbed and lower radiator hose. Truck also has flex a lite fans on it.
It needs a fuel shutoff wired or pull cable put on.
I'm asking 15 for it. Which I think is fair it does not need that much work to be drivable. Would also take some off if I could keep the turbo. Had intentions of building a small set of twins.
My number is 319 four 70 six six 20 call or text. Please leave a message and I will get back with when I'm not at work.
[IMG]
[/IMG]
[
0 commentaires:
Enregistrer un commentaire