I've been thinking of trying this for a few months and tonight I finally tore into a couple Garrett chargers I had lying around. I took a GT37VA lbz vvt Garrett 62mm turbo, And a international dt466 58mm t4,1.1 a/r turbo and put the two together lol.
I used the .58 a/r 62mm compressor cover/wheel and backing plate from the vvt turbo, bolted it to the international center cartridge, this allowed to use the t4 1.1 turbine housing!
I'm sure Garrett sells a turbo with these specs, or something really close, I just wonder what kinda power I can expect to make with it? I'm thinking 600ish?
Specs on the mix match charger are now:
Inducer 62.8mm 13 fins 4" vband mouth piece
Exducer 88mm
A/R .58
Exhaust : A/R 1.11 10 Fins
Inducer 73mm
Exducer 64mm
T4
4" v band down pipe
I used the .58 a/r 62mm compressor cover/wheel and backing plate from the vvt turbo, bolted it to the international center cartridge, this allowed to use the t4 1.1 turbine housing!
I'm sure Garrett sells a turbo with these specs, or something really close, I just wonder what kinda power I can expect to make with it? I'm thinking 600ish?
Specs on the mix match charger are now:
Inducer 62.8mm 13 fins 4" vband mouth piece
Exducer 88mm
A/R .58
Exhaust : A/R 1.11 10 Fins
Inducer 73mm
Exducer 64mm
T4
4" v band down pipe
0 commentaires:
Enregistrer un commentaire