I bought a billet 76/96/1.10 from another member on here a while ago and finally started building a kit over the last couple months. He made good power with it under I believe it was a 63 on a 5.9 with efi live. Side by side kit built by firepunk. Irrc it ran low 11's with a big lift. I'm pretty busy between working 60+ hours a week and going to school full time so funds are low and time is short to say the least.
My truck is a 04.5 manual. Engine is bored .040, coated pistons, 12v peened and polished rods, scheid street and strip cam, Hamilton pushrods and springs, b&b side draft. 10 mm stroker cp3, exergy 60% jets, and Ed billet 63/68. I will be using that as the secondary.
So here is my progress, problems I have had, and where I sit now with a few questions. Hopefully my mistakes will prevent some else tackling this on their own from doing what I have and it will go more smoothly for them.
My truck is a 04.5 manual. Engine is bored .040, coated pistons, 12v peened and polished rods, scheid street and strip cam, Hamilton pushrods and springs, b&b side draft. 10 mm stroker cp3, exergy 60% jets, and Ed billet 63/68. I will be using that as the secondary.
So here is my progress, problems I have had, and where I sit now with a few questions. Hopefully my mistakes will prevent some else tackling this on their own from doing what I have and it will go more smoothly for them.
0 commentaires:
Enregistrer un commentaire