hello guys, I am not on this site a whole lot
I am a cummins guy so im on cummins forum a lot more but
I have my truck for sale over there and thought id list it here as well.
My user name is mattydc over there.
thanks for looking.
1995 Twin turbo built Cummins RCLB Western PA
I am selling my 1995 12 valve cummmins 4wd RCLB
because I have not driven it in the past 2 years due to work.
i built the truck for fun wanted to one day drag race it.
but never made it to the track so I have no clue what it will run.
Never been dyno'd but people have told me with the mods I have it will
produce quite a bit.
Here is the parts list. I have receipts for all the work.
Exterior.
The antenna 3rd brake light and cab lights were shaved by previous owner.
Street Scene bumper painted black to match.
Street Scene black chrome grille and bumper inserts.
2 pair of fog lights in a box never installed. One is regular version the other is
the halo style.
Headlights. I have black housing lights. I also have a second pair of the same
and a pair of the halo style lights.
Taillights are aftermarket led lights with the outer housing painted black to match.
Tow mirrors / are painted black to match. also have stock mirrors laying around.
Roll pan painted black. Also have factory rear bumper and hitch in the shed. that will come with the sale.
Windows are tinted
Truck was painted in 2007 and body work was done. but the truck is showing a little bit of rust on the rockers and a little bit on the one wheel well. I may have to body work done to sell as a perfect truck if I cant sell as is. I am marking down the price 2k to let the buyer get the work done as of now.
Interior.
the interior has power windows and door lock from factory.
I have autometer gauges boost, boost, trans, egt
Torque converter lock up switch.
seats are in great shape no rips. grey cloth interior.
cummins floor matts.
led lights.
cd player
switch for airdog and water meth.
All new brakes
All the front end steering/suspension parts were just replaced.
steering is nice and firm.
Power steering was replaced as well as the vacuum pump
2 new batteries.
Exhaust is a 5 inch downpipe to 5 inch piping with an over axle dump.
I have the piece of pipe that could make it a normal exit exhaust out the rear
it has a 6 inch black tip on it. I had a stack on it but sold the stack. Some pictures will show the stack.
On to the most important part the performance.
fully built transmission by HTS ( listing below is copy out of my receipt not familiar with particular parts so here it is for you to decide whats what)
The truck shifts very firm and pulls hard with no slip at all. I have never felt
the trans act up one bit even with the performance mods.
parts list as follows
48re rebuild kit
planets and shell
billlet input shaft/ hub
output shaft
o/d plate
filter
518 14 roller design
48 drums
band
band strut ,4.2, blockers
618 47rh/e 6bt Torque converter (89 percent)
1995 HTS valve body
Airdog 2 200
5x .018 sdx injectors high flow bodies 12 valve stage 1
Machining work on the head by previous owner I have the receipt for.
says Recondition cylinder head and resurface cylinder head or block (.012)
Fire ring install (.105) Have the paper work for that with all kind of numbers on it. Not sure on the process. Just know that it needed done.
OFV by tork teknology the ofv060 is installed I have an ofv070 as well
Aem water meth big injector nozzle in installed on the truck but not wired on because i disconnected when I put the twins on. Was going to take it off to sell
but ended up just keeping it on.
B & M deep transmission pan
Source Automotive twin turbo kit
exhaust cloth wrapped hot pipe to avoid any heat up of the firewall.
Candy blue powdercoated piping
BD 64/71/14 secondary Charger
Borg Warner S480 (80mm) 1.32ar
Htt 3 peice Exhaust manifold
CASE breather valve covers on 2 - 3 and 4 - 5
ARP head studds
Haisley push rods
Toxic diesels retainers and keepers
heavy duty valve springs
Pusher intake horn.
Mack/rack plug
The p7100 was benched/calibrated at Columbus Diesel Supply
installed 5k gov sprigs and .024 dv. they bumped the timing up to around 23 degrees i believe Ill have to look at my paper work.
afe intake
Turbo piping has pop off valves
I also made brackets to hold the piping together so they woudlnt come apart from all the boost being produced.
also have a set of rear trac bars.
the rear has a smaller block in it to level the truck.
I still have the factory block if you wish to put them back on.
I have the stock wheels on it right now.
I sold the black fuels. I wanted to buy new ones but never did.
Look up my threads and posts to see the truck more.
i will Load pictures as soon as I can.
I am missing a good bit of stuff im sure. Just so much to remember.
I will start pulling out my files and binders of parts.
Or personal msg me on here.
I want the money. Trades are not really wanted but you never know.
I really would like to pay off student loans.
the truck has about 250k miles on it.
I bought it with about 220k I owned the truck for around 4 years.
so you see how little I got to drive it. Always building it.
Title in Hand.
Truck runs great. very powerful and fast.
looks great. Could use some after market wheels again.
Links to pictures. will get about 50 pictures soon to post more details.
Truck as is 20,500. OBO
22,500 if you want the body done up perfectly by my local body guy.
a book of the receipts and paper work will be provided.
email me at adam_matty@yahoo.com
or txt or call me at 724-622 three five three eight.
i do work a good bit of hours so Im sorry if the responses are delayed.
Best bet would be start with some txt msgs, voice mail on my phone is not set up.
Located Near Pittsburgh Pennsylvania. Western PA.
20 minutes from the Pittsburgh National Airport.
If someone wanted to fly in
I could make arrangements to pick you up.
I am a cummins guy so im on cummins forum a lot more but
I have my truck for sale over there and thought id list it here as well.
My user name is mattydc over there.
thanks for looking.
1995 Twin turbo built Cummins RCLB Western PA
I am selling my 1995 12 valve cummmins 4wd RCLB
because I have not driven it in the past 2 years due to work.
i built the truck for fun wanted to one day drag race it.
but never made it to the track so I have no clue what it will run.
Never been dyno'd but people have told me with the mods I have it will
produce quite a bit.
Here is the parts list. I have receipts for all the work.
Exterior.
The antenna 3rd brake light and cab lights were shaved by previous owner.
Street Scene bumper painted black to match.
Street Scene black chrome grille and bumper inserts.
2 pair of fog lights in a box never installed. One is regular version the other is
the halo style.
Headlights. I have black housing lights. I also have a second pair of the same
and a pair of the halo style lights.
Taillights are aftermarket led lights with the outer housing painted black to match.
Tow mirrors / are painted black to match. also have stock mirrors laying around.
Roll pan painted black. Also have factory rear bumper and hitch in the shed. that will come with the sale.
Windows are tinted
Truck was painted in 2007 and body work was done. but the truck is showing a little bit of rust on the rockers and a little bit on the one wheel well. I may have to body work done to sell as a perfect truck if I cant sell as is. I am marking down the price 2k to let the buyer get the work done as of now.
Interior.
the interior has power windows and door lock from factory.
I have autometer gauges boost, boost, trans, egt
Torque converter lock up switch.
seats are in great shape no rips. grey cloth interior.
cummins floor matts.
led lights.
cd player
switch for airdog and water meth.
All new brakes
All the front end steering/suspension parts were just replaced.
steering is nice and firm.
Power steering was replaced as well as the vacuum pump
2 new batteries.
Exhaust is a 5 inch downpipe to 5 inch piping with an over axle dump.
I have the piece of pipe that could make it a normal exit exhaust out the rear
it has a 6 inch black tip on it. I had a stack on it but sold the stack. Some pictures will show the stack.
On to the most important part the performance.
fully built transmission by HTS ( listing below is copy out of my receipt not familiar with particular parts so here it is for you to decide whats what)
The truck shifts very firm and pulls hard with no slip at all. I have never felt
the trans act up one bit even with the performance mods.
parts list as follows
48re rebuild kit
planets and shell
billlet input shaft/ hub
output shaft
o/d plate
filter
518 14 roller design
48 drums
band
band strut ,4.2, blockers
618 47rh/e 6bt Torque converter (89 percent)
1995 HTS valve body
Airdog 2 200
5x .018 sdx injectors high flow bodies 12 valve stage 1
Machining work on the head by previous owner I have the receipt for.
says Recondition cylinder head and resurface cylinder head or block (.012)
Fire ring install (.105) Have the paper work for that with all kind of numbers on it. Not sure on the process. Just know that it needed done.
OFV by tork teknology the ofv060 is installed I have an ofv070 as well
Aem water meth big injector nozzle in installed on the truck but not wired on because i disconnected when I put the twins on. Was going to take it off to sell
but ended up just keeping it on.
B & M deep transmission pan
Source Automotive twin turbo kit
exhaust cloth wrapped hot pipe to avoid any heat up of the firewall.
Candy blue powdercoated piping
BD 64/71/14 secondary Charger
Borg Warner S480 (80mm) 1.32ar
Htt 3 peice Exhaust manifold
CASE breather valve covers on 2 - 3 and 4 - 5
ARP head studds
Haisley push rods
Toxic diesels retainers and keepers
heavy duty valve springs
Pusher intake horn.
Mack/rack plug
The p7100 was benched/calibrated at Columbus Diesel Supply
installed 5k gov sprigs and .024 dv. they bumped the timing up to around 23 degrees i believe Ill have to look at my paper work.
afe intake
Turbo piping has pop off valves
I also made brackets to hold the piping together so they woudlnt come apart from all the boost being produced.
also have a set of rear trac bars.
the rear has a smaller block in it to level the truck.
I still have the factory block if you wish to put them back on.
I have the stock wheels on it right now.
I sold the black fuels. I wanted to buy new ones but never did.
Look up my threads and posts to see the truck more.
i will Load pictures as soon as I can.
I am missing a good bit of stuff im sure. Just so much to remember.
I will start pulling out my files and binders of parts.
Or personal msg me on here.
I want the money. Trades are not really wanted but you never know.
I really would like to pay off student loans.
the truck has about 250k miles on it.
I bought it with about 220k I owned the truck for around 4 years.
so you see how little I got to drive it. Always building it.
Title in Hand.
Truck runs great. very powerful and fast.
looks great. Could use some after market wheels again.
Links to pictures. will get about 50 pictures soon to post more details.
Truck as is 20,500. OBO
22,500 if you want the body done up perfectly by my local body guy.
a book of the receipts and paper work will be provided.
email me at adam_matty@yahoo.com
or txt or call me at 724-622 three five three eight.
i do work a good bit of hours so Im sorry if the responses are delayed.
Best bet would be start with some txt msgs, voice mail on my phone is not set up.
Located Near Pittsburgh Pennsylvania. Western PA.
20 minutes from the Pittsburgh National Airport.
If someone wanted to fly in
I could make arrangements to pick you up.
0 commentaires:
Enregistrer un commentaire