We recently built a 12 valve with the following upgrades:
Balanced rotating assembly
Colt Cams Big Stick
4kgsk
60# valve springs
#5 fuel plate
TST AFC medium spring
4" down pipe to 5" exhaust
BHAF
Ported waste gate on the HX35
215 injectors
16.5* timing
We got a TFOD shift kit fir the 47re as well as a billet band strut, HD anchor, billet accumulator valve, and the BW solenoid.
In the instructions for the TFOD it has some options of springs depending on application. Some for a 12v and some for a 24v/gasser. The instructions refer to them as PT body (part throttle) and the other appears to be a governor but isn't labeled well. Since we changed the operating range and power band of the engine would we want to use the 24v/gasser springs? I want the trans to work with the engine like a matched pair.
The pickup is a '96 3500 4x4 with 4.10 gears and 33" tires. It won't tow often. It's also my wife's driver, so it won't get rallied too hard most of the time.
Balanced rotating assembly
Colt Cams Big Stick
4kgsk
60# valve springs
#5 fuel plate
TST AFC medium spring
4" down pipe to 5" exhaust
BHAF
Ported waste gate on the HX35
215 injectors
16.5* timing
We got a TFOD shift kit fir the 47re as well as a billet band strut, HD anchor, billet accumulator valve, and the BW solenoid.
In the instructions for the TFOD it has some options of springs depending on application. Some for a 12v and some for a 24v/gasser. The instructions refer to them as PT body (part throttle) and the other appears to be a governor but isn't labeled well. Since we changed the operating range and power band of the engine would we want to use the 24v/gasser springs? I want the trans to work with the engine like a matched pair.
The pickup is a '96 3500 4x4 with 4.10 gears and 33" tires. It won't tow often. It's also my wife's driver, so it won't get rallied too hard most of the time.
0 commentaires:
Enregistrer un commentaire