This question is for you guys that have replaced the factory lines with after market lines. How did you connect the injector return line and pump return lines back together? I'm using the -8 AN adapters at the pump and running 1/2" fuel lines to and from the tank. I thought about using a fuel pressure gauge "tap" in the line and running a hosebarb fitting off of that for the injectors to dump back into the return line but I can't find a proper fitting that will work there. So I thought I'd see what you guys have done. I'd appreciate any help you guys could offer. Thanks, Dave S.
Inscription à :
Publier les commentaires (Atom)
0 commentaires:
Enregistrer un commentaire