I recently cleaned injectors. Put everything together and started truck. The sound from the exhaust sounded rougher than before I took it all apart. Went back through and found #6 exhaust pushrod was bent. Just slightly had to put on flat surface and noticed that way. These are the heavy duty rods. So I put my stock pushrod back in. I however did not adjust the valve lash for that cylinder. After the stock rod was installed it still didnt sound like normal from the exhaust. Could this be a simple valve lash adjustment or did I bend something else as well?
Inscription à :
Publier les commentaires (Atom)
0 commentaires:
Enregistrer un commentaire