S357- completely disassembled, sand blasted and painted, dual flapper with 0.60 a/r
S471- 71/96/1.32 completely disassembled, sand blasted and painted
Piping-4 in vband hotpipe welded with the t6 along with a new gasket,
Cold pipe was fabbed up then sand blasted then painted, has a vband on the 471
Custom I/c pipe to bolt up to a 2nd gen 12v
All clamps and boots are supplied in the setup
Silicon oil drain line
Intake tube that is 4in
Custom made feed line for the 471
Stock feed line goes on the s357
5in vband flange to go to your exhaust
Both turbos are in spec
Zero miles are on this setup feel free to call me 2489782959
This setup clears a/c and battery, only modifications to the truck needed is to install a bung in your oil pan, clamp on an air filter, flip manifold, relocate heat exchanger if is an auto
S471- 71/96/1.32 completely disassembled, sand blasted and painted
Piping-4 in vband hotpipe welded with the t6 along with a new gasket,
Cold pipe was fabbed up then sand blasted then painted, has a vband on the 471
Custom I/c pipe to bolt up to a 2nd gen 12v
All clamps and boots are supplied in the setup
Silicon oil drain line
Intake tube that is 4in
Custom made feed line for the 471
Stock feed line goes on the s357
5in vband flange to go to your exhaust
Both turbos are in spec
Zero miles are on this setup feel free to call me 2489782959
This setup clears a/c and battery, only modifications to the truck needed is to install a bung in your oil pan, clamp on an air filter, flip manifold, relocate heat exchanger if is an auto
0 commentaires:
Enregistrer un commentaire