Hello, I'm new to the forum so if I have this posted in the wrong section let me know. Thanks.
I'm in the process of swapping a 1998 12 valve QCLB cab onto a 1997 ECLB frame. The 1998 was originally an auto 2wd truck. The frame has the 1997 12 valve, 4x4, and NV4500. The 1997 was a complete running and driving truck when I took it apart, but in rough shape.
So I have the cab on the frame with all the wiring and plumbing complete. When I go to start it I get nothing. I tested power to the starter and I have 12 volts, but I have no power from the signal wire. Also when I hit the brakes all the lights on the dash go out. I can't think of any other issue right now, other than the batteries may be a little low. (But enough power to at least turn it over.)
I am thinking I either have a grounding issue or a short somewhere. Another thought is something to do with the auto to manual conversion making it unable to start.
Been beating my head against a wall for awhile now so any help will be greatly appreciate.
I'm in the process of swapping a 1998 12 valve QCLB cab onto a 1997 ECLB frame. The 1998 was originally an auto 2wd truck. The frame has the 1997 12 valve, 4x4, and NV4500. The 1997 was a complete running and driving truck when I took it apart, but in rough shape.
So I have the cab on the frame with all the wiring and plumbing complete. When I go to start it I get nothing. I tested power to the starter and I have 12 volts, but I have no power from the signal wire. Also when I hit the brakes all the lights on the dash go out. I can't think of any other issue right now, other than the batteries may be a little low. (But enough power to at least turn it over.)
I am thinking I either have a grounding issue or a short somewhere. Another thought is something to do with the auto to manual conversion making it unable to start.
Been beating my head against a wall for awhile now so any help will be greatly appreciate.
0 commentaires:
Enregistrer un commentaire